TM 9-2320-272-24-3
4-68. REAR WIRING HARNESS REPLACEMENT (Contd)
NOTE
Perform step 3 for all vehicles except M931/A1/A2 and
M932/A1/A2.
3.
Install two ground wires (4) on frame crossmember (2) with screw (1), new lockwasher (3), and new
locknut (5).
NOTE
Perform step 4 for M931/A1/A2 and M932/A1/A2 vehicles.
4.
Install two ground wires (11) on frame crossmember (6) with screw (7), clamp (8), new lockwasher (10),
and locknut (9).
NOTE
Perform step 5 for M923/A1/A2, M925/A1/A2, M927/A1/A2, and
M928/A1/A2 vehicles only.
5.
Connect wire (16) for right- and left-side marker lights (14) to wire (15).
6.
Connect wires (13), (12), (22), and (23) for right rear composite light (21) to wires (17), (18), (19),
and (20).
NOTE
Perform step 7 for M923/A1/A2 and M925/A1/A2 vehicles only.
7.
Close spring tension tab (24) around wires (17), (18), (19), and (20).
ALL EXCEPT M931/A1/A2 AND
M931/A1/A2 AND M932/A1/A2 VEHICLES
M932/A1/A2 VEHICLES
4-456
