TM 9-2320-272-24-3
4-66. FRONT WIRING HARNESS (M939/A1) REPLACEMENT (Contd)
33.
Disconnect wires (22), (23), and (24) from headlight beam selector switch (25).
34.
Remove four nuts (26), lockwashers (27), screws (21), and connector (20) from rear wiring harness
receptacle (28). Discard lockwashers (27).
35.
Disconnect wire (30) from wire (29).
36.
Disconnect wire (32) from transfer case switch capacitor wire (31).
NOTE
Perform step 37 for M936 wrecker only.
37.
Disconnect wire (34) from 5th gear lock-up capacitor wire (33).
4-399
