TM 9-2320-272-24-3
4-39. ENGINE MOUNTING BRACKETS AND ISOLATORS REPLACEMENT (Contd)
8.
Position front bracket (9), four isolators (4), washers (3), and two screws (2) on crossmember (13) and
install backing plate (12) with two washers (10) and new locknuts (11). Tighten locknuts (11)
75-85 lb-ft (102-115 Nm).
Slowly release tension on chain and lower engine (5) while aligning holes in front bracket (9) and
9.
radiator bracket (6) with holes in engine (5).
10.
Install front bracket (9) and radiator bracket (6) on engine (5) with four washers (7) and screws (8).
Tighten screws (8) 80 lb-ft (109 Nm).
Tighten two screws (14) and locknuts (15) 120-140 lb-ft (163-190 Nm).
11.
Remove lifting device and chain from two engine lifting brackets (1).
12.
Install hose (20) on radiator inlet tube (17) and thermostat housing connector (19) with two
13.
clamps (16) and new tiedown strap (18).
4-276
