TM 9-2320-272-24-2
Disconnect cable (3) from lead (4) of lever switch bracket (5).
7.
Disconnect cable (2) from lead (1) of lever switch bracket (5).
8.
Disconnect accelerator linkage from throttle control lever (para. 3-43).
9.
Remove two screws (7), washers (6), and lever switch bracket (5) from bracket assembly (8).
10.
Remove screw (14), ball joint (12), lockwasher (13), and throttle control lever (15) from control
11.
lever (16). Discard lockwasher (13).
Remove two screws (11), lockwashers (10), clamp (9), and bracket assembly (8) from engine
12.
assembly (17) and bracket (18). Discard lockwashers (10).
Connect accelerator linkage to throttle control lever (para. 3-43).
13.
3-1206