TM 9-2320-272-24-2
NOTE
Tabs on assemblies may require minor bending to fit during
installation.
Install three screws (8) and nut assemblies (7) to backside of left pillar wall (9).
6.
Install pin (11) through top in left front post assembly (10) with two new cotter pins (12).
7.
Install left front post assembly (10) on left post support (14) with pin (11) resting on on left post
8.
support (14) and install with three screws (13) and new locknuts (15).
Position tapping plate (1) inside right door pillar wall (2) and install right front brace assembly (5) on
9.
outer cowl wall (6) with four washers (4) and screws (3).
3-1176
