TM 9-2320-272-24-2
3-441. ATMOSPHERIC FUEL TANK VENT SYSTEM KIT REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Battery ground cables disconnected (para. 3-126).
Two locknuts (Appendix D, Item 294)
Antiseize tape (Appendix D, Item 72)
NOTE
Perform steps 1 through 3 for single fuel tank system only.
1.
Remove three fuel lines (1) from adapters (2).
2.
Remove locknut (5), screw (4), and tee (3) from rail (6). Discard locknut (5).
3.
Remove three adapters (2) from tee (3).
4.
Remove three fuel lines (1) from adapters (2).
5.
Remove locknut (5), screw (4), and tee (3) from rail (6). Discard locknut (5).
6.
Remove three adapters (2) from two elbows (16) and tee (3).
7.
Remove two elbows (16) from tee (3).
8.
Remove vent line (10) from adapter (11).
9.
Remove adapter (11) from adapter (12).
10.
Remove adapter (12) from tube (13).
11.
Remove four clamps (7), tubes (15) and (13), and hose (9) from air intake pipe (8).
3-1140
