TM 9-2320-272-24-2
3-418. MACHINE GUN MOUNTING KIT MAINTENANCE (Contd)
b. Disassembly
NOTE
Note position of adapters for installation.
1.
Remove four locknuts (7), (11), and (16), washers (11, (9), and (14), screws (2), (8), and (13),
washers (l), (9), and (14), and adapters (3), (10), and (15) from bracket and post (6), (12), and (17).
Discard locknuts (7), (11), and (16).
2.
Remove cotter pin (5) and pin (4) from right front bracket and post (6). Discard cotter pin (5).
3.
Remove cotter pin (19) and pin (18) from left rear bracket and post (17). Discard cotter pin (19).
NOTE
Ammunition trays on right front bracket and post and left rear
bracket and post are replaced the same. Steps 4, 5, and 6 cover the
right front bracket and post.
4.
5.
Remove four locknuts (20), washers (21), screws (23), and ammunition tray (26) from right front
bracket and post (6). Discard locknuts (20).
NOTE
Note position of screws and tray brackets for installation.
6.
Remove four locknuts (28), washers (27), screws (29), and two tray brackets (22) from ammunition
tray extensions (24). Discard locknuts (28).
3-1068