TM 9-2320-272-24-2
3-379. VAN HEATER AND EXHAUST REPLACEMENT (Contd)
Apply
antiseize tape to male threads of heater fuel valve (16) and heater nipple (17).
1.
Install
two seals (9) on van body (3) with eight screws (4).
2.
Install
two brackets (8) on heater (5) with five screws (21) and new lockwashers (19).
3.
Install
heater exhaust pipe (10) on heater (5).
4.
NOTE
Assistant will help with step 5.
Place heater (5) in van body (3).
5.
Install bracket (8) on van body (3) with four screws (6) and new lockwashers (7).
6.
Install ground strap (20) on bracket (8) and heater (5) with screws (21) and new lockwasher (19).
7.
Install fuel overflow line (22) on fitting (17) with nut (18).
8.
Install fuel receptacle line (24) on heater fuel valve (16) with nut (23).
9.
Connect external fuel pump receptacle connector (25) to heater (5).
10.
Connect power receptacle connector (15) to heater (5).
11.
Connect room thermostat connector (26) to heater (5).
12.
Install exhaust pipe (2) on heater exhaust pipe (10) with two clamps (12), eight screws (1), two
13.
screws (11), new lockwashers (13), and nuts (14).
3-930