TM 9-2320-272-24-2
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M929/A1/A2, M930/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
Lifting device
Chain
GENERAL SAFETY INSTRUCTIONS
PERSONNEL REQUIRED
All personnel must stand clear during lifting
operations.
TWO
1.
Install chain on two steps (3) and attach chain to lifting device.
2.
Place tailgate control lever in OPEN position (TM 9-2320-272-10).
3.
Remove two retaining pins (2) from dump body (1).
All personnel must stand clear during lifting operations. A
snapped cable, or swinging or shifting load, may result in injury to
personnel.
4.
Remove tailgate (4) from dump body (1) and lower tailgate (4) onto supports.
5.
Remove lifting device and chain from steps (3).
1.
Install chain on two steps (3) and attach chain to lifting device.
All personnel must stand clear during lifting operations. A
snapped cable, or swinging or shifting load, may result in injury to
personnel.
2.
Raise tailgate (4) and position on dump body (1).
3.
Install two retaining pins (2) on dump body (1).
4.
Place tailgate control lever to LOCKED position (TM 9-2320-272-10).
5.
Remove lifting device and chain from steps (3).
3-882
