TM 9-2320-272-24-2
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M923/A1/42, M925/A1/A2, M927/A1/A2,
TM 9-2320-272-10
M928/A1/A2
TM 9-2320-272-24P
EQUIPMENT CONDITION
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Ten locknuts (Appendix D, Item 291)
1.
Remove five locknuts (5), screws (8), lower splash guard (6), and retainer (7) from upper splash
guard (3). Discard locknuts (5).
2.
Remove three locknuts (1), screws (4), and upper splash guard (3) from weld bracket (2). Discard
locknuts (1).
3.
Remove two locknuts (11), screws (10), and braces (9) from weld bracket (2). Discard locknuts (11).
1.
Install two braces (9) on weld bracket (2) with two screws (10) and new locknuts (11).
2.
Install upper splash guard (3) on weld bracket (2) with three screws (4) and new locknuts (1).
3.
Install retainer (7) and lower splash guard (6) on upper splash guard (3) with five screws (8) and
new locknuts (5).
3-874
