TM 9-2320-272-24-2
3-313. CAB DOOR LOCK REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic' tool kit (Appendix E, Item 1)
s
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
l Outside door handle removed (para. 3-307).
l Cab door inspection hole cover removed
Six screw-assembled lockwashers (Appendix D,
Item 574)
l Inside door handle removed (para. 3-308).
a. Removal
1.
Remove three screw-assembled lockwashers (2) from cab door (3). Discard screw-assembled
lockwashers (2).
2.
Remove three screw-assembled lockwashers (1) from cab door (3). Discard screw-assembled
lockwashers (1).
3.
Remove door lock assembly (6) through door inspection hole (8).
b. Installation
1.
Position door lock assembly (6) with latch (7) inserted through hole (8) in cab door (3) and lock
shaft (5) through inner door panel (4).
2.
Install door lock assembly (6) on cab door (3) with three new screw-assembled lockwashers (2) and (1).
FOLLOW-ON TASKS:
Install
door inspection hole cover (para. 3-312).
l
Install
outside door handle (para. 3-307).
l
Install
inside door handle (para. 3-308).
l
Check
cab door lock for proper operation (TM 9-2320-272-10).
l
3-812
