TM 9-2320-272-24-2
3-265. VAN SWING DAVIT AND PULLEY REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M934A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Davit chain and wire rope removed (para. 3-264).
Locknut (Appendix D, Item 299)
Two cotter pins (Appendix D, Item 50)
Cotter pin (Appendix D, Item 51)
1.
Remove six screws (16), three clamps (15), and swing davit (5) from van body (6) and base (7).
2.
Remove two cotter pins (18) and davit pin (17) from swing davit (5). Discard cotter pins (18).
3.
Remove locknut (4), washer (3), screw (19), two spacers (1), and davit pulley (2) from swing davit (5).
Discard locknut (4).
4.
Remove three screws (14) and base (7) from van body (6).
5.
Remove cotter pin (11), shaft (10), spacer (12), and pulley (13) from pulley bracket (8). Discard cotter
pin (11).
6.
Remove four screws (9) and pulley bracket (8) from van body (6).
1.
Install pulley bracket (8) on van body (6) four screws (9).
2.
Install spacer (12) and pulley (13) on pulley bracket (8) with shaft (10) and new cotter pin (11).
3.
Install base (7) on van body (6) with three screws (14).
4.
Install davit pulley (2) and two spacers (1) on swing davit (5) with screw (19), washer (3), and new
locknut (4).
5.
Install davit pin (17) in swing davit (5) with two new cotter pins (18).
6.
Install swing davit (7) on van body (6) and base (7) with three clamps (15) and six screws (16).
3-726
