TM 9-2320-272-24-2
3-254. TRACTOR SPARE TIRE CARRIER (M931A1/A2, M932A1 /A2) REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M931A1/A2, M932A1/A2
TN 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Four jack stands
Parking brake set (TM 9-2320-272-10).
Spare tire removed (TM 9-2320-272-10).
Prybar
Trailer coupling hoses removed (para. 3-209).
Lifting device
Utility chain
MATERIALS/PARTS
Twenty locknuts (Appendix D, Item 291)
Eight locknuts (Appendix D, Item 294)
Four locknuts (Appendix D, Item 275)
Six locknuts (Appendix D, Item 274)
Lockwasher (Appendix D, Item 402)
Two lockwashers (Appendix D, Item 345)
One locknut (Appendix D, Item 288)
a. Removal
1.
Remove two locknuts (16), screws (13), and reflector bracket (14) from carrier base (15). Discard
locknuts (16).
2.
Remove three locknuts (8), washers (7), and screws (5) from trailer harness plug (4) and carrier
base (15). Discard locknuts (8).
Remove locknut (34), washer (33), lockwashers (32), (31), and (30), two ground straps (6), screw (28),
3.
and trailer harness plug (4) from harness base (29). Discard locknut (34) and lockwashers (30), (31),
and (32).
4.
Remove locknut (37), screw (35), and two clamps (36) from fuel lines (38) and carrier base (15).
Discard locknut (37).
Remove locking pin (23) and retaining pin (22) from boom extension (1).
5.
6.
Remove boom extension (1) from boom (21).
7.
Remove four locknuts (3), screws (2), and boom (21) from boom support (20). Discard locknuts (3).
Remove four locknuts (26), screws (24), and two reflector brackets (27) from carrier access
8.
steps (25). Discard locknuts (26).
Remove locknut (10), screw (19), three locknuts (12), screws (18), and washers (17) from frame
9.
brackets (9) and (11) and carrier base (15). Discard locknuts (10) and (12).
3-704
