TM 9-2320-272-24-2
3-218. WHEEL AND TIRE (M939) ROTATION
THIS TASK COVERS:
a. Wheel and Tire Removal
d. Inner Rear Wheel Installation
b. Inspection
e. Outer Rear Wheel Installation
f. Front Wheel Installation
c. Wheel and Tire Rotation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M939
TM 9-2320-272-10
TM 9-2320-272-24P
SPECIAL TOOLS
TM 9-2610-200-24
Inner wheel socket (Appendix E, Item 77)
EQUIPMENT CONDlTlON
TOOLS
Parking brake set (TM 9-2320-272-10).
General mechanic's tool kit (Appendix E, Item 1)
Spare tire removed (TM 9-2320-272-10).
Torque wrench (Appendix E, Item 145)
GENERAL SAFETY INSTRUCTIONS
Torque multiplier
Ensure inner and outer lug nuts are properly
torqued.
1.
Loosen sixty stud nuts (3) on four outside rear wheels (5) and two front wheels (2).
2.
Using hydraulic jack, raise vehicle and place two jack stands under rear-rear axle (6), two jack
stands under forward-rear axle (4), and two jack stands under front axle (1).
NOTE
Tag wheels for rotation.
3.
Remove sixty stud nuts (3), two front wheels (2), and four outside rear wheels (5) from vehicle.
4.
Using inner wheel socket, remove forty inner wheel spacer nuts (7) and four inside rear wheels (8)
from vehicle.
1.
Inspect wheel rims (9) for cracks, stud hole damage, and bends. Replace wheel rims (9), if cracked,
damaged, or bent.
2.
Inspect tires (10) for tread wear (TM 9-2610-200-24).
3-616
