TM 9-2320-272-24-1
3-196. BRAKE PEDAL MAINTENANCE
THIS TASK COVERS:
c. Adjustment
a. Removal
b. Installation
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1) EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERlALS/PARTS
Two cotter pins (Appendix D, Item 48)
1.
Remove return spring (5) from brake pedal (9) and cab (2).
2.
Remove cotter pin (11), fulcrum pin (13), and brake pedal (9) from brake pedal valve (1). Discard
cotter pin (11).
3.
Remove jamnut (3) and pedal stop (4) from brake pedal valve (1).
4.
Remove cotter pin (7), roller pin (10), and two rollers (6) from brake pedal (9). Discard cotter pin (7).
5.
Remove rubber pad (8) from brake pedal (9).
1.
Install
rubber pad (8) on brake pedal (9).
2.
Install
two rollers (6) on brake pedal (9) with roller pin (10) and cotter pin (7).
3.
Install
pedal stop (4) on brake pedal valve (1) with jamnut (3). Do not tighten jamnut (3).
4.
Install
brake pedal (9) on brake pedal valve (1) with fulcrum pin (13) and cotter pin (11).
5.
Install
return spring (5) on brake pedal (9) and cab (2).
Use hand pressure to depress brake pedal (9) only until rollers (6) contact plunger (12), and position
pedal stop (4) against brake pedal (9). Tighten jamnut (3).
3-534
