TM 9-2320-272-24-1
3-185. WET RESERVOIR (SUPPLY TANK) SAFETY VALVE REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDlTlON
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERlALS/PARTS
Air reservoirs drained (TM 9-2320-272-10).
Antiseize tape (Appendix C, Item 72)
GENERAL SAFETY INSTRUCTIONS
Do not remove safety valve before draining air
reservoirs.
Do not remove safety valve before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
Remove safety valve (1) from bushing (2) at inlet side of reservoir (3).
Wrap male pipe threads with antiseize tape before installation.
Install safety valve (1) in bushing (2) at inlet side of reservoir (3).
3-512
