TM 9-2320-272-24-1
3-161. FRONT SPRING AND MAIN LEAF REPLACEMENT (Contd)
NOTE
The spring pins in right spring hanger and left spring shackle
must be driven out from the inside. The remaining two pins can be
driven out from either side.
Remove pin retaining locknut (10) and screw (7) from spring hanger (1). Discard locknut (10).
10.
Drive pin (9) out of spring hanger (1) and leaf spring eye (8).
11.
Remove pin retaining locknut (13) and screw (11) from spring shackle (2). Discard locknut (13).
12.
Drive pin (14) out of spring shackle (2) and leaf spring eye (12).
13.
Lift spring assembly (6) from lower spring seat (3) and carefully move over rear axle (5) and tie
14.
rod (4) to the ground.
3-442
