TM 9-2320-272-24-1
3-158. CARRIER DIFFERENTIAL TOP COVER GASKET AND SIDE COVER GASKET
REPLACEMENT (Contd)
b. Top Cover Gasket Installation
1.
Apply gasket sealant to mating surfaces of top cover (4).
NOTE
Perform step 2 for front axle carrier differential top cover,
2.
Install new gasket (8) and top cover (4) on front axle carrier differential housing (9) with ten
washers (6) and screws (7). Tighten screws (7) 27-34 lb-ft (37-48 N.m).
NOTE
Perform steps 3 through 6 for forward-rear and rear-rear axle
l
carrier differential top cover,
Male pipe threads must be wrapped with antiseize tape prior to
l
installation.
3.
Install new gasket (8) and top cover (4) on carrier differential housing (9) with eight washer (6) and
screws (7). Tighten screws (7) 27-34 lb-ft (37-48 N.m).
4.
Install bracket (5) on carrier differential top cover (4) with two washers (6) and screws (7). Tighten
screws (7) 27-34 lb-ft (37-48 N.m)
5.
Install two adapters (2) on manifolds (1).
6.
Install four air lines (8) on adapters (2).
FRONT AND REAR AXLE
REAR AXLE
3-436
