TM 9-2320-272-24-1
3-143. TRANSFER CASE INTERLOCK VALVE REPLACEMENT (Contd)
b. Installation
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
1.
Install elbow (2), adapter (4), and two elbows (5) and (11) on interlock valve (3).
2.
Install interlock valve (3) on bracket (13) with two screws (14).
NOTE
Assistant will help with step 3.
3.
Install screw (10) and cable clamp (15) on Frame (7) with new lockwasher (21), interlock valve
ground wire (16), new locknut (20), diode ground wire (19), washer (18), and new locknut (17).
4.
Connect wire (8) to connector (9).
5.
Connect vent line (12) to elbow (11).
6.
Connect air cylinder supply line (1) to elbow (2).
7.
Connect interlock valve supply line (6) to elbow (5).
3-394