TM 9-2320-272-24-1
3-137. TRANSMISSION MOUNTING BRACKET AND ISOLATOR (M939A2) REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M939A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
Transmission jack (Appendix E, Item 147)
GENERAL SAFETY INSTRUCTIONS
MATERIALS/PARTS
Keep hands clear of transmission during bracket
Two lockwashers (Appendix D, Item 350)
and isolator replacement.
Two lockwashers (Appendix D, Item 392)
a. Removal
WARNING
Keep hands clear of transmission when removing bracket and
isolator. A slipped jack may result in injury to personnel.
1.
Using a transmission jack, raise transmission (7) and remove two screws (5) and lockwashers (6)
from transmission mounting bracket (8). Discard lockwashers (6).
2.
Remove two screws (2), lockwashers (3), isolator (4), and transmission mounting bracket (8) from
bracket (1). Discard lockwashers (3).
b. Installation
NOTE
It will be necessary to raise and lower transmission slightly to
obtain proper alignment of screws.
1.
Install transmission mounting bracket (8) on bracket (1) with isolator (4), two new lockwashers (3),
and screws (2).
Using jack, position transmission (7) on transmission mounting bracket (8) and install with two new
2.
lockwashers (6) and screws (5).
3-373
