TM 9-2320-272-24-1
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Air reservoirs drained (TM 9-2320-272-10).
Antiseize tape (Appendix C, Item 72)
GENERAL SAFETY INSTRUCTIONS
Do not disconnect air lines before draining air
reservoirs.
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
1.
Disconnect wire connector (3) from front wheel drive lock-in switch (2).
2.
Remove lock-in switch (2) from front wheel drive lock-in valve elbow (1).
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
1.
Install lock-in switch (2) on front wheel drive lock-in valve elbow (1).
2.
Connect wire connector (3) to front wheel drive lock-in switch (2).
3-280