TM 9-2320-272-24-1
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Left splash shield removed (TM 9-2320-272-10).
Antiseize tape (Appendix C, Item 72)
Battery ground cables disconnected (para. 3-126).
Disconnect wire (1) from oil pressure sending unit (2).
1.
Remove oil sending unit (2) from adapter fitting (5).
2.
NOTE
Step 3 is for M939/A1 models only
Remove adapter fitting (5) and elbow (4) from left side of engine (3).
3.
b. Installation
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
Steps 1 and 2 are for M939/A1 models only.
Install elbow (4) on left side of engine (3).
1.
Install adapter fitting (5) on elbow (4).
2.
Install oil sending unit (2) on adapter fitting (5).
3.
Connect wire (1) to oil pressure sending unit (2).
4.
3-262
