TM 9-2320-272-24-1
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Battery ground cables disconnected (para. 3-126).
Two lockwashers (Appendix D, Item 352)
NOTE
Speedometer and tachometer are replaced the same. This
procedure covers speedometer.
1.
Remove eight screws (7) from instrument cluster (8).
2.
Pull instrument cluster (8) away from instrument panel (9).
3.
Loosen nut (2) and disconnect speedometer driveshaft (1) from speedometer (6).
4.
Remove two nuts (3), cable assembly (11), extension stud (10), washer (12), and two lockwashers (4)
from speedometer mounting bracket (5). Discard lockwashers (4).
5.
Remove mounting bracket (5) and speedometer (6) from instrument cluster (8).
1.
Install speedometer (6) and mounting bracket (5) on instrument cluster (8) with two new
lockwashers (4), extension stud (10), and nut (3).
2.
Install cable assembly (11) on extension stud (10) with washer (12) and nut (3).
3.
Install speedometer driveshaft (1) on speedometer (6) and tighten nut. (2).
4.
Install instrument cluster (8) on instrument panel (9) with eight screws (7).
3-254
