TM
9-2320-272-24-1
THIS TASK COVERS:
c. Installation
a. Removal
b. Cleaning and Inspection
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M939A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Coolant drained below water manifold level
Cap and plug set (Appendix C, Item 14)
Antiseize tape (Appendix C, Item 72)
Fan and fan shroud removed (para. 3-64).
Drivebelt removed (para. 3-71).
1.
Disconnect air line (6) and elbow (2) from actuator (3).
2.
Disconnect air line (5) and elbow (4) from actuator (3).
NOTE
Note position of actuator for installation.
3.
Remove actuator (3) from radiator inlet tube (1).
4.
Disconnect air line (5) from elbow (7).
NOTE
Assistant will support fan clutch while removing screws.
5.
Remove four screws (10), washers (9), and fan clutch (11) from engine (8).
6.
Remove elbow (7) from fan clutch (11).
1.
Clean all parts (para. 2-14).
2.
Inspect air lines (5) and (6) for cracks, kinks, and wear.
3.
Inspect other parts (para. 2-15).
4.
Replace all parts failing inspection.
3-212
