TM 9-2320-272-24-1
3-48. EXHAUST STACK REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
GENERAL SAFETY INSTRUCTIONS
Gasket (Appendix D, Item 170)
Locknut (Appendix D, Item 317)
Do not touch hot exhaust system components with
GM grease (Appendix C, Item 28)
bare hands.
WARNING
Do not touch hot exhaust system components with bare hands.
Injury to personnel may result.
1.
Remove
locknut (6) and screw (3) from clamp (2) at right rear of cab (7). Discard locknut (6).
NOTE
Assistant will help with step 2.
2.
Remove
clamp (2) from exhaust stack (1) and muffler (4).
3.
Remove
exhaust stack (1) and gasket (5) from muffler (4). Discard gasket (5) and clean gasket
remains
from mating surfaces.
b. Installation
1.
Apply small amount of GM grease on muffler mating surface, and position new gasket (5) and
exhaust stack (1) over muffler (4) so opening of exhaust stack (1) is directly away from cab (7).
NOTE
Assistant will help with step 2.
2.
Secure exhaust stack (1) to muffler (4) with clamp (2), screw (3), and new locknut (6).
3-140