TM 9-2320-272-24-1
3-20. FUEL TRANSFER PUMP AND SUPPLY LINES (M939A2) MAINTENANCE (Contd)
c. Installation
1.
Apply antiseize tape to threads of elbow (15) and install elbow (15) on fuel transfer pump (13).
2.
Install new gasket (12) and fuel transfer pump (13) on engine block (17) with two screws (14).
3.
Connect fuel supply line (16) to elbow (15) on fuel transfer pump (13).
4.
Install fuel supply tube (5) on fuel transfer pump (13) with two new seal washers (11) and adapter (10).
Finger tighten adapter (10).
NOTE
Perform steps 5 through 7 if fuel supply tube was removed.
5.
Install fuel supply tube (5) on fuel filter head (3) with two new seal washers (4) and adapter (6).
6.
Tighten adapter (10).
7.
Place new banjo seal (9) around fuel drain manifold (7) and install on adapter (6) with screw (8).
8.
Apply antiseize tape to threads on fuel pressure transducer (1) and install fuel pressure
transducer (1) on adapter (10).
9.
Connect wiring harness (2) to fuel pressure transducer (1).
FOLLOW-ON TASK: Prime fuel system (para. 3-22).
3-67
