TM 9-2320-272-24-1
3-15. AIR CLEANER ASSEMBLY AND MOUNTING BRACKET MAINTENANCE (Contd)
c. Installation
NOTE
Floor mat must be pulled back to gain access to one screw hole in
steps 1 and 2.
Install mounting bracket (5) on cab floor (16) with three new lockwashers (15) and screws (14).
1.
Install mounting bracket (3) on mounting bracket (5) and subfloor (18) with two new lockwashers (15)
2.
and screws (17).
Install mounting band (7) on air cleaner assembly (9) with screw (11) and new locknut (10).
3.
Position support strap (8) on air cleaner assembly (9).
4.
NOTE
Assistant will help with step 5.
Position hose clamps (6) and (12) on air cleaner tube hose (4) and cleaner-to-intake pipe hump
5.
hose (13), and install air cleaner assembly (9) on air cleaner tube hose (4) and cleaner-to-intake pipe
hump hose (13) with hose clamps (6) and (12).
Install air cleaner assembly (9) on mounting brackets (5) and (3) with support strap (8), two
6.
screws (2), mounting band (7), and two new locknuts (1). Fasten support strap (8).
Tighten hose clamps (6) and (12).
7.
FOLLOW-ON TASKS:
Start engine (TM 9-2320-272-10) and check for air leaks.
l
Ensure air filter indicator in cab indicates green (TM 9-2320-272-10).
l
3-54
