TM 9-2320-272-24-1
THIS TASK COVERS:
a. Removal (M939/A1)
d. Installation (M939/A1)
b. Removal (M939A2)
e. Installation (M939A2)
c. Inspection
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Hoed raised and secured (TM 9-2320-272-10).
MATERIALS/PARTS
Parking brake set (TM 9-2320-272-10).
Lockwasher (M939/A1) (Appendix D, Item 354)
Right splash shield removed (TM 9-2320-272-10).
Lockwasher (M939/A1) (Appendix D, Item 358)
Adhesive sealant (M939A2) (Appendix C. Item 5)
1.
Remove dipstick (1) from dipstick tube (9)
2.
Remove nut (12), lockwasher (11), washer (10), screw (7), and clamp (8) from dipstick tube (9) and
bracket (4). Discard lockwasher (11).
3.
Remove dipstick tube (9) from oil pan (6).
4.
Remove screw (2), lockwasher (3), and bracket (4) from engine block (5). Discard lockwasher (3).
1.
Remove dipstick (14) from dipstick tube (15).
2.
Remove dipstick tube (15) from engine block (5).
1.
Inspect dipstick (1) or (14). Replace if cracked or broken.
NOTE
Perform step 2 for M939/A1 series vehicles.
2.
Inspect rubber compression seal (13) on dipstick (1). Replace dipstick (1) if compression seal (13) is
damaged.
3-8
