TM 9-2320-272-24-1
Table 2-1. Unit Preventive Maintenance Checks and Services (Contd).
ITEM TO
NOT FULLY
CHECK/
ITEM INTERVAL
MISSION
PROCEDURE
NO.
SERVICE
CAPABLE IF:
22
Semi-
Front
1. Apply lubricant to spring pins (1) until it
springs,
annual
appears between front spring pin (1) and bushing (3) at
both ends of shackle (2). If spring pin (1) does not accept
lubricant, remove spring pin (1).
shaft,
universal
and slip
joints,
and axle
(Contd)
EXPECTED TEMPERATURES
ABOVE 15F
+40F TO -15F
+40F TO -65F
(ABOVE -9C)
(+4C TO -26C)
(+4C TO -54C)
GAA
All temperatures
Grease, automotive and
artillery MIL-G-10924)
2. Inspect front spring pin (1) and bushing (3) at
both ends of shackle (2) (para. 3-163).
2-24
