TM 9-2320-260-34-2
17-26. THERMAL BARRIER INSULATION REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
lNITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
All
TM 9-2320-260-20
TM 9-2320-260-34P-2
MATERIALS/PARTS
EQUIPMENT CONDITION
Adhesive (Appendix C, Item 2)
q Driver's seat removed (TM 9-2320-260-20).
q Companion seat removed (TM 9-2320-260-20).
NOTE
All thermal barrier insulation is replaced the same. This proce-
dure covers the left rear upper insulation panel only.
1. Pull panel (2) away from cab interior (1). Discard panel (2) if irreparable damage occurs when
removing.
2. Clean all remaining insulating material and adhesive from contact surface areas.
b. Installation
CAUTION
Once panel is coated with adhesive and put in place, it cannot be
moved. Be careful not to place panel in the wrong position.
NOTE
Make all necessary cutouts and slits in panels before installation,
Shiny side of panel must face outward.
1. Place panel (2) in cab interior (1) to check for fit.
2, Remove panel (2) and coat contact areas with adhesive.
3. Install panel (2) on cab (1) and press firmly into place.
17-74
