TM 9-2320-260-34-2
16-11. REAR WINCH AUTOMATIC BRAKE MAINTENANCE (Contd)
Install new woodruff key (6) in shaft (5).
1.
2,
Aline slot in brakedrum (7) with woodruff key (6) and install on shaft (5) with washer (8), new
lockwasher (9), and screw (10).
Place brake band (11) on brakedrum (7), with captive nut (16) leg on right.
3.
Install new O-ring (3) in brake housing (4).
4.
Place washer (2) on adjusting screw (1) and insert screw (1) through seal (3), left wall of brake
5.
housing (4), spring (12), clearance hole in left leg of brake band (11), and thread into captive nut (16)
in right leg of brake band (11).
6.
Turn adjusting screw (1) until spring length (17) is 2.125-2.187 in. (53.98-55.55 mm).
Position new gasket (13) and cover (14) on housing (4) and install with six new screw-assembled
7.
lockwashers (15).
FOLLOW-ON TASKS: q Install rear winch (TM 9-2320-260-20).
q Adjust automatic brake (TM 9-2320-260-20).
16-75
