TM 9-2320-260-34-2
I
I
15-73. LEFT SIDE EMERGENCY LAMP WIRING HARNESS REPLACEMENT (Contd)
b. Installation
1.
Position left side emergency lamp wiring harness (2) in van body (3). Ensure left side emergency
lamp wiring harness (2) is routed through twelve clamps (4), grommet (6), two clamps (10),
clamps (13), clamp (15), and grommet (21).
2.
Install grommet (6) in van ceiling (1).
Install wire (8) on positive battery terminal (9) with nut (7).
3.
4.
Install clamp (15) on spare tire carrier mounting bracket (14) with screw (17) and new locknut (16).
Install two clamps (10) and clamps (13) on van body (3) with two screws (11) and screws (18).
5.
6.
Connect lead (12) to circuit breaker (19).
7.
Connect left side emergency lamp wiring harness lead (20) to right side emergency lamp wiring
harness lead (30).
Install grommet (21) in switch box (29) and route three wires (23) through grommet (21) and
8.
switch box (29).
Install switch box (29) in van body (3) with four screws (22).
9.
Install three wires (23) on switch (28) by tightening two screws (24).
10.
Install switch (28) on switch box (29) with two screws (27).
11.
12.
Install cover (26) on switch (28) with two screws (25).
13.
Secure left side emergency lamp wiring harness (2) to van ceiling (1) with twelve clamps (4) and
screws (5).
15-272
