TM 9-2320-260-34-2
15-62. LIFTGATE PUMP OIL TANK REPLACEMENT (M820A2)
THIS TASK COVERS:
b. Installation
a. Removal,
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M820A2
TM 9-2320-260-34P-2
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit
Parking brake set (TM 9-2320-260-10).
(Appendix B, Item 1)
Liftgate hydraulic tubing removed (para. 15-57).
Two Iockwashers (Appendix D, Item 236)
Antiseize tape (Appendix C,Item 50)
Clean area around hoses and lines before removal to prevent
entry of dirt. Damage will occur if dirt or dust enters system.
Cap or plug all openings immediately after disconnecting lines
and hoses to prevent contamination. Remove caps or plugs prior
to installation. Failure to do so may result in injury to personnel.
q Tag all lines and hoses for installation.
a. Removal
1. Remove hydraulic hose (3) from adapter (4).
2. Remove hydraulic hose (11) from adapter (10).
3. Remove hydraulic hose (9) from elbow (8).
4. Remove two nuts (7), screws (1), Iockwashers (2), brackets (12), and oil tank (5) from frame (6).
Discard Iockwashers (2).
5. Remove adapter (4) and elbow ( 18) from oil tank (5).
6. Remove elbow (8), adapters (10) and (16), and tee (17) from oil tank (5).
7. Remove breather cap (14), bushing (13), and plug (15) from oil tank (5).
15-236
