TM 9-2320-260-34-2
15-49. AIR CONDITIONER REPLACEMENT (Contd)
5.
Remove sixteen screws (1) and top enclosure (2) from bonnet (9) and air conditioner (8).
6.
Remove seven screws (6), ten screws (3), bottom enclosure (5), and left enclosure (4) from bonnet (9)
and air conditioner (8).
7.
Remove four screws (14), plate (13), and bellows (12) from right enclosure (11).
8.
Remove cotter pin (16) and door rod (10) from swing arm (15). Discard cotter pin (16).
9.
Remove ten screws (7) and right enclosure (11) from bonnet (9) and air conditioner (8).
Disconnect cable (24) from air conditioner (8).
10.
11.
Remove screw (26), lockwasher (27), washer (28), ground wire (29), and lockwasher (25) from air
conditioner (8). Discard Iockwashers (27) and (25).
12.
Remove nut (33), Iockwashers (32), washer (31), screw (23), ground wire (29), and lockwasher (30)
from mounting plate (19) and bonnet floor (35). Discard Iockwashers (32) and (30).
13.
Remove five nuts (34), Iockwashers (36), washers (37), and screws (22) from mounting plate (19) and
bonnet floor (35). Discard Iockwashers (36).
14.
Remove six screws (21) and Iockwashers (38) from mounting plate (18) and bonnet floor (35). Discard
Iockwashers (38).
15.
Attach chain to lifting device and four lifting brackets (17).
WARNING
All personnel must stand clear during lifting operations.
A swinging or shifting load may cause injury to personnel.
Ensure lifting capacity is greater than weight (450 lb (204 kg)) of
air conditioner. Failure to do so may result in injury to personnel
or damage to equipment.
NOTE
Assistant will help with step 16.
16.
Remove air conditioner (8) from bonnet (9).
17.
Remove six screws (20) and mounting plates (18) and (19) from air conditioner (8).
15-190
