TM 9-2320-260-34-2
15-48. BONNET DOOR MAINTENANCE
THIS TASK COVERS:
d. Assembly
a. Removal
e. Installation
b. Disassembly
c. Cleaning and Inspection
lNITIAL SETUP
MATERIALS/PARTS (Contd)l
APPLICABLE MODELS
Fibrous glass felt insulation (Appendix C, Item 16)
M820, M820A1, M820A2
Primer (Appendix C, Item 31)
TOOS
Sealing compound (Appendix C, Item 45)
General mechanic's tool kit
REFERENCES (TM)
(Appendix B, Item 1)
TM 9-2320-260-10
Rivet gun (Appendix B, Item 120)
TM 9-2320 -260-34P-2
MATERIALS/PARTS
EQUIPMENT CONDITION
Thirty-eight rivets (Appendix D, Item 352)
Parking brake set (TM 9-2320-260-10).
Fifty-two rivets (Appendix D, Item 363)
Six seals (Appendix D, Item 444)
GENERAL SAFETY INSTRUCTIONS
Seal (Appendix D, Item 445)
Gloves, eyeshields, and dust mask must be worn
during bonnet door maintenance.
WARNING
Van body is insulated with fibrous glass felt insulation. Gloves,
eyeshields, and dust mask must be worn during bonnet door
maintenance. Failure to do so may result in injury to personnel.
a. Removal
1.
Remove two screws (6) and washers (5) and open bonnet door (7).
NOTE
Assistant will help with step 2.
2. Remove seven screws (1) and bonnet door (7) from bonnet (2).
3. Remove four screws (3) and lever (4) from bonnet door (7).
15-182
