TM 9-2320-260-34-2
15-29. SIDE DOORS MAINTENANCE (Contd)
1.
Remove pin (22) and handle (21) from center case (26) and handle (15).
Remove three rivets (16), handle (15), and gasket (14) from pocket (13). Discard rivets (16) and
2.
gasket (14).
Remove sixteen rivets (17) and pocket (13) from door (7). Discard fivets (17).
3.
Remove two cotter pins (20), screws (19), lockwashers (18), and rods (24) from center case (26) and
4.
bolts (2). Discard cotter pins (20) and Iockwashers (18).
Remove four screws (23) and center case (26) from inner panel (4).
5.
Remove eight screws (1) and bolts (2) from inner panel (4).
6.
Remove fourteen screws (12), retainer (11), seal (10), hinge (9), and seal (8) from door (7). Discard
7.
seals (10) and (8).
8.
Remove eleven screws (3), thirty-two screws (25), and inner panel (4) from door (7).
Break adhesive and remove four moldings (5) and (6) from inner panel (4).
9.
1. For general cleaning instructions, refer to para. 2-8.
2. For general inspection instructions, refer to para. 2-9.
3. Inspect all movable parts of center case (26) and two bolts (2) for proper operation. Replace center
case (26) or bolts (2) if damaged.
4. Inspect rods (24), moldings (5) and (6), and pocket (13) for bends, breaks, and cracks. Replace
rods (24), moldings (5) or (6), or pocket (13), if damaged.
5. Inspect door (7) for damage. Replace door (7) if damaged.
15-96
