TM 9-2320-260-34-1
6. Install three poppet balls (11) and compression springs (12) in shifter housing (10).
7. Install plunger (4) in shift finger (5).
8. Install shift finger (5) on shifter housing cover (14) with screw (13), new lockwasher (2), and nut (3).
9. Install new gasket (6) and shifter housing cover (14) on shifter housing (10) with six new
lockwashers (15) and screws (1).
10. Install finger plunger (7) and spring (8) in shifter housing (10) with retainer (9).
d. Installation
NOTE
Perform steps 1 and 2 for M816 vehicles. Perform step 3 for all
vehicles except M816.
1.
Install new gasket (18) and shifter housing (10) on transmission housing (17) with twelve new
screw-assembled lockwashers (16).
2.
Install rotochamber bracket (23) on shifter housing ( 10) and rotochamber (24) with two new
lockwashers (20), screws (19), new lockwashers (22) and nuts (21).
Install new gasket (18) and shifter housing (10) on transmission housing (17) with fourteen new
3.
screw-assembled lockwashers (16).
8-42
