TM 9-2320-260-34-1
3-52. OIL PUMP REPAIR (Contd)
Install plunger (7), new spring (6), and plug (5) in oil pump (14) with retaining cap (4), new lock-
30.
plate (3); new lockwasher (2) and screw (1). Bend two tabs of lockplate (3) over screw (1) and one
tab of lockplate (3) over oil pump (14).
Install new spring (8), new disk (9), and new bypass seat (10) in oil pump (14).
31.
Install new gasket (11) and flange plate (12) on oil pump (14) with two new screw-assembled
32.
lockwashers (13).
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
33.
Install pipe plug (23) in oil pump (14). Tighten pipe plug (23) 45-55lb-ft(61-75 Nm).
34.
Install pipe plug (22) in oil pump (14). Tighten pipe plug (22) 20-30 lb-ft (27-41 Nm).
Install pipe plug (16) in oil pump (14). Tighten pipe plug ( 16) 30-40lb-ft(41-54 Nm).
35.
36.
Install pipe plug (15) in oil pump (14). Tighten pipe plug (15) 45-55 lb-ft (61-75 Nm).
Install nipple (21), elbow (20), nipple (17), elbow (18), and adapter (19) on oil pump (14).
37.
FOLLOW-ON-TASK:
Install oil pump (para. 3-68).
3-176
