TM 9-2320-260-34-1
3-51. CYLINDER HEAD REPAIR (Contd)
NOTE
Top stop fuel injectors used after engine serial number 11246663.
22. Install fuel injector (4) on cylinder head (3) with washer (5), clamp (2), and two screws (1). Tighten
two screws (1) alternately in 4 lb-ft (5 Nm) steps to 10-12 lb-ft (14-16 Nm).
23. Measure protrusion on injector tip (7) with gage block. Replace injector sleeve (6) if protrusion does
not measure 0.060-0.070 in. (1.52- 1.78 mm) (para. 3-79).
3-158
