TM 9-2320-260-34-1
3-29. MOUNTING ENGINE ON REPAIR STAND (Contd)
NOTE
Assistant will help with this procedure.
1. Install rear engine mount adapter on rear water header (11) with five washers (8) and screws (7).
2. Install front engine mount adapter on front water header (2) with two washers (3) and screws (4).
3. Install chain on engine lifting brackets (1) and lifting device.
WARNING
All personnel must stand clear during lifting operations. A shifting
or swinging load may cause injury to personnel.
4.
Carefully lift, and position engine (10) against engine repair stand mounting plate.
Aline holes on engine repair stand mounting plate with holes on mounting adapters and engine
5.
access opening (9).
Install engine (10) on repair stand mounting plate with eight washers (5) and screws (6).
6.
Remove lifting device and chain from engine lifting brackets (1).
7.
3-108
