TM 9-2320-260-34-1
3-24. ENGINE AND TRANSMISSION REPLACEMENT (Contd)
Install tube (5) on elbow (6).
9.
Install three clamps (1) on engine intake manifold (7) with three washers (2), new lockwashers (3),
10.
and screws (4). Tighten screws (5) 25-30 lb-ft (34-41 Nm).
11.
Install clamp (9) on cam follower housing (8) with new screw-assembled lockwasher (10). Tighten
screw-assembled lockwasher (10) 30-35 lb-ft (41-48 Nm.
12.
Install bracket (11) on cam follower housing (12) with new screw-assembled lockwasher (13). Tighten
screw-assembled lockwasher (13) 30-35 lb-ft (41-48 Nm).
Install ground strap (23), ground wire (24), and wire (27) on starter motor (22) with new lock-
13.
washer (26) and nut (25).
Install wires (14) and (17) on starter solenoid (18) with new lockwasher (16) and nut (15).
14.
Install wire (19) and clip (21) on starter solenoid (18) with screw (20).
15.
3-90
