TM 9-2320-260-20
12-14. DUMP BODY SPARE TIRE CARRIER REPLACEMENT (M817)
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-260-10
M817
TM 9-2320-260-20P
MATERIALS/PARTS
EQUIPMENT CONDITION
Sixteen locknuts
Parking brake set (TM 9-2320-260-10).
PERSONNEL REQUIRED
Spare tire removed (TM 9-2320-260-10).
Toolbox removed (para. 12-15).
Two
1.
Remove two locknuts (4), screws (1), and angle brackets (2) from bracket (3). Discard locknuts (4).
2. Remove two locknuts (22) and (5), screws (6) and (10), and braces (9) from bracket (3) and spare tire
carrier base (8). Discard locknuts (5) and (22).
3. Remove two locknuts (23), screws ( 16), and bracket (3) from spare tire carrier base (8). Discard
locknuts (23).
4. Remove two locknuts (13) and (19), screws (7) and (21), and spare tire carrier base (8) from brackets
(12) and (18). Discard locknuts (13) and (19).
5. Remove two locknuts (15) and (17), screws (11) and (20), and brackets (12) and (18) from frame (14).
Discard locknuts (15) and (17).
1. Install brackets (12) and (18) on frame (14) with two screws (11) and (20) and new locknuts (15) and
(17).
2. Install spare tire carrier base (8) on brackets (12) and (18) with four screws (7) and (21) and new
locknuts (13) and (19).
3. Install bracket (3) on spare tire carrier base (8) with two screws (16) and new locknuts (23).
4. Install two braces (9) on spare tire carrier base (8) and bracket (3) with two screws (6) and (10) and
new locknuts (22) and (5).
5. Install two angle brackets (2) on bracket (3) with two screws (1) and new locknuts (4).
12-28
