TM 9-2320-260-20
Table 2-1. Unit Level Preventive Maintenance Checks and Services (Contd).
NOT FULLY
ITEM TO
PROCEDURE
ITEM
INTERVAL
MISSION
CHECK/
No.
CAPABLE IF:
SERVICE
VEHICLE - CAB AREA
Monthly, or every 1,000 mi (1,609 km), lubricate
Selector
Semi-
43
hinges and latches, transfer and power takeoff shift
annual
linkage, fittings (5) on clutch and brake pedal linkage and
brake pedal yoke pin (6), hand brake lever, rear control
lever linkage, and dump truck tailgate bearings with
seasonal grade OE/HDO. Lubricate clutch and brake
pedal shaft bracket with GAA. If vehicle has not
accumulated 1,000 mi (1,609 km) in a 6-month period,
lubricate at time of preventive maintenance service.
COMPLETE VEHICLE - ABOVE
Semi-
a. Check each tire for wear using tread depth gage.
Wheel
44
Tread depth should not be less that 1/8 in. (3.18 mm), as
annual
indicated on tire tread depth (TM 9-2610-201-14).
Replace tire(s) worn beyond limit (para. 9-3).
b. Refer to TM 9-2610-200-14 and TM 9-2610-201-14 for
specific instructions for matching tires and tire rotation.
One or more
c. Inspect all wheel studs and capnuts for secure
mounting and missing parts (para. 9-3). Tighten capnuts wheel studs or
450-500 lb-ft (610-678 Nm), if loose.
capnuts are
missing.
Inspect for loose condition. Adjust if loose (para. 9-6).
Wheel
45
Semi-
annual
2-33
