TM 9-2320-260-20
Table 2-1. Unit Level Preventive Maintenance Check and Services (Contd).
NOT FULLY
ITEM TO
PROCEDURE
ITEM INTERVAL
MISSION
CHECK/
No.
CAPABLE IF:
SERVICE
Power
Any class III leak.
Semi-
a. Inspect power divider (2) for oil leaks, cracks, and
32
divider
loose screws that may cause leaks. Notify your
annual
(M-816)
supervisor if leaks or cracks are found.
b. Service power divider (2) annually or every 12,000
mi (19,308 km), whichever occurs first.
c. Change lubricant only when required by mainten-
ance repair action, or if contaminated by water or other
foreign material. Drain only after operation when hot.
Place vehicle in level position. Remove filler plug (3) and
drain plug (4) from case, and after draining, reinstall
drain plug (4). Fill power divider (M816) within 1/2 in.
(12.7 mm) of filler plug (3) opening, when lubricant is
cold, or to plug level when hot. Install filler plug (3).
2-23
