TM 11-7440-293-14
4-41. INSTALLING CURBSIDE ANTENNA CABLES.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
Flat-tip screwdriver
Materials/Parts
Equipment Condition
Antenna cable routed, mounting
Cable clamps (3 required)
1-inch sheet metal screws
holes predrilled.
(3 required)
Nylon ties (as required)
ACTION
REMARKS
ITEM
LOCATION
NOTE
Once cable is routed, secure in position pulling cable
tight.
Cable clamp (1),
Using flat-tip screwdriver, install.
1 . Curbside
There are three cable clamps.
screw (2) and
Step 1 is typical for all three
cable clamps.
Do step 1 again.
2.
Cable clamps (4)
Install.
Nylon tie (5)
3.
There are three nylon ties.
Secure antenna cables with nylon ties
where possible. Step 3 is typical for
all three nylon ties.
Nylon ties (6)
Do step 3 again.
4.
NOTE
For antenna cable connections refer to SB 11-131.
4-76