TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
0013 00
UNIT MAINTENANCE
To determine the proper mounting position for the CBC on the vehicle bed from front to back, lower the
CBC into position on the vehicle bed so that the forward end of the upper section (1) is 1.4 ! .13 inches
back (3.0 inches ! .13 from the lower section) from the inside front wall of truck bed (2) of the vehicle. Do
not remove the hoisting sling at this time since it will be necessary to remove the CBC from the vehicle
bed in a later step.
To correctly position the CBC with respect to the vehicle bed from left to right, the CBC is centered on the
bed of the vehicle by ensuring that the distance from the CBC side walls (3) to the outer edge of the
vehicle bed (4) is equal at all four corners.
2
1
1.4 inches
+/- .13
3
4
Position the CBC on
Top view of 5 T
the vehicle bed so that
Cargo Truck with
each side of the CBC is
CBC positioned on
the same distance
rear bed
away from the edge of
the vehicle bed at the
four corners
0013 00-3
