TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
0004 00
CONTROLS, INDICATORS, LABELS AND INSTRUCTION PLATES
WINCH AND LIFTING/LOCKING ASSEMBLIES
Table 2 describes the controls for the Winch and Lifting/Locking Assemblies.
8
5
4
2
3
6
7
1
Table 2. Winch and Lifting/Locking Assemblies Controls
KEY
CONTROL
FUNCTION
Controls winch assembly and is used to raise and lower
1
RATCHET HANDLE
upper expandable section of CBC
Used to lock the Lifting/Locking Assembly in a vertical
2
LIFTING/LOCKING ASSEMBLY HANDLE
position
LIFTING/LOCKING ASSEMBLY HANDLE
Used to release the handle from the main body tube of
3
RELEASE HAIRPIN COTTER
the Lifting/Locking Assembly
LIFTING/LOCKING ASSEMBLY STOWAGE
Used to lock the Lifting/Locking Assembly in its stowing
4
RELEASE HAIRPIN COTTER
position on the roof of the CBC
LIFTING/LOCKING ASSEMBLY BASE
Engages with the Corner Fitting Pulley Assembly on the
5
PLATE
lower section to align the Lifting/Locking Assembly
LIFTING/LOCKING ASSEMBLY BASE
Engage in the Interlock Extrusion on the lower section of
6
PLATE ALIGNMENT PINS
the CBC to lock and align the Lifiting/Locking Assembly
Engages the base of the Lifting/Locking Assembly to
7
CORNER FITTING PULLEY ASSEMBLY
support and align
LIFTING/LOCKING ASSEMBLY ROOF
Provides a docking mechanism for the Lifting/Locking
8
STOWAGE BLOCK
Assembly when the CBC is in retracted mode
0004 00-2
