MWO 9-2320-272-20-4
1. PURPOSE.
The purpose of this modification is to provide an automatic throttle kit which increases engine RPM's
automatically during operation of the crane.
2. PRIORITY.
This modification is classified as ROUTINE.
END ITEM TO BE MODIFIED.
3.
a. 5-ton, 6x6, M936 and M936A1 series trucks.
PART
CAGE
MODEL
NSN
EIC
NOMENCLATURE
NO.
CODE
NO.
BTF
19207
8736988
M936
Truck, Medium Wrecker
BSG
19207
8750163
M936A1
Truck, Medium Wrecker
b. Vehicle's National Stock Number (NSN) will not change as a result of this MWO.
4. MODULE TO BE MODIFIED.
Not applicable.
5. PARTS TO BE MODIFIED.
Not applicable.
6. APPLICATION.
a. Time compliance statement: MWO effective date is 1 September, 1993, and completion date is
1 September, 1997.
b. The lowest level of maintenance authorized to apply the MWO is unit maintenance.
c. Work force and man-hour requirements for application of the MWO to a single unit, end item,
or system are as follows:
REQUIREMENTS
WORK FORCE/SKILLS
MAN-HOURS
Two Wheeled Vehicle Mechanics
4
(MOS 63B) or equivalent
Total man-hours required for a single application of this
MWO is 8 hours.
d. There is no other MWO that must be applied prior to the application of this MWO.
e. There is no additional information necessary to apply this MWO.
2
