TM 9-2320-392-10-2
WRECKER HYDRAULIC SYSTEM
0097 00
TROUBLESHOOTING - Continued
WRECKER HYDRAULIC SYSTEM - Continued
Table 1. Wrecker Hydraulic System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
16. M1089A1
2.
Check hydraulic
If Class III leaks are found,
MATERIAL
tubes and fittings
notify Field Maintenance.
HANDLING CRANE
for Class III leaks.
(MHC) BOOM DOES
NOT LIFT UP OR
DOWN OR HOLD
UNDER LOAD -
Continued
3.
Check to see if
If MHC boom does not lift up
MHC boom lifts up
or down, or hold under load,
or down or holds
notify Field Maintenance.
under load (WP
0041 00).
CAUTION
Hydraulic oil level must not be above or more than 0.75 in. (1.9 cm) below
black line on hydraulic oil view gage. Failure to comply may result in damage
to equipment.
17. M1089A1
1.
Check hydraulic oil
1.
If hydraulic oil view gage
MATERIAL
level at hydraulic
registers below black line,
HANDLING CRANE
remove hydraulic tank cap
(MHC) BOOM DOES
and fill hydraulic oil to
NOT TELESCOPE IN
Item 9).
OR OUT
2.
Install hydraulic tank cap.
0097 00-18