TM 9-2320-392-10-2
WRECKER HYDRAULIC SYSTEM
0097 00
TROUBLESHOOTING - Continued
WRECKER HYDRAULIC SYSTEM - Continued
Table 1. Wrecker Hydraulic System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
M1089A1 STINGER
3.
Check to see if
If stinger, telescopic lift
/TELESCOPIC LIFT
stinger, telescopic
cylinders, fold cylinders, and
CYLINDERS/FOLD
lift cylinders, fold
right 30K operate do not
CYLINDERS/RIGHT
cylinders, and right
operate, notify Field
30K WINCH DO
30K winch operate
Maintenance.
NOT OPERATE -
(WP 0035 00).
Continued
CAUTION
Hydraulic oil level must not be above or more than 0.75 in. (1.9 cm) below
black line on hydraulic oil view gage. Failure to comply may result in damage
to equipment.
6.
M1089A1 STINGER
1.
Check hydraulic oil
1.
If hydraulic oil view gage
DOES NOT
level at hydraulic
registers below black line,
OPERATE
oil view gage.
remove hydraulic tank cap
and fill hydraulic oil to
2.
Install hydraulic tank cap.
0097 00-7